Tools
|
|
|
 | Blue Ripper Rail Saw JR | Description:
Do you need speed, accuracy and quality work at your job site? The Blue Ripper Jr. Rail Saw delivers that and much more. Whether in the shop or out on the job site, the Blue Ripper Jr. nails precision work with ease.
The Blue Ripper Jr. makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand. |  |
|
|
 | Red Ripper SR - Router | Description:
The Red Ripper was built from the ground up to be a no-frills, high-performance, easy to use router, exclusively for the stone fabrication industry. All of the aluminum parts on the Red Ripper are made from 6061 T6 to reduce weight without sacrificing strength. The Red Ripper has red anodized on all aluminum parts to protect against the alkalinity of granite slurry and for looks.
Technical Specifications:
- New Higher Torque Spindle
- 8100 RPM Spindle for
greater tool life!
- TEFC Lincoln Induction Motor
- Unique NWS Belt System
- Rubber Non-Scratch Hydroplane Base
- Quick Water Disconnect
- Uses standard 7/8" Router Bits
- All Connections Mounted Vertical
- Easy-Adjust Locking Spindle!
- Only 65 Pounds in Weight!
- Manufactured with PRIDE in the USA!
| |
|
|
 | Red Ripper JR - Router | Description:
Technical Specifications
- 110v 12Amp Makita Motor
- 2,800-10,500 Motor RPM
- 2,400-8,800 Spindle RPM
- Fits Standard 7/8 Bore Bits
- One Hand Water Disconnect
- Easy-Adjust Locking Height Adjustment
- Only 18 Pounds in Weight!
Includes These:
|
| |
|
|
 | A FREE SAW DEAL Promotion | Description:
Description
Purchase 10 12\" or 14\" Green Giant saw blades with a huge 15MM Segment height for cutting concrete, asphalt, or brick and block and receive a brand new 2007 hand held high speed cut off saw. Have this brand new hand held saw with 10 premium cutting saw blades delivered to your office or the job site TODAY for FREE. Call if you have any questions on this practical promotion for the jobs to come. | |
|
|
 | MK - 1270/1495 Gas Cutoff Saws | Description:
| |
| MK-1270 / 1495 Features: |
| • |
Ideal for concrete, masonry and building materials of
all kinds |
| • |
High torque transmission reduction system |
| • |
Sealed recoil starter to keep out dust |
| • |
Multi-stage air filtration system |
| • |
Adjustable blade guard |
| • |
Decompression valve for easy starting |
| • |
Easy to use drive belt tensioning system with
external indicator |
| • |
Soft rubber inserts in rear handle for operator
comfort |
| • |
Six-point anti-vibration system |
| • |
Includes dry cutting diamond blade, abrasive wheel
and 20, 22 and 25.4 mm collar adapters |
| |
|
|
 | Kwikie Handheld cut off saw POWER TOOLS | Description:
-Power: 4.8 HP
-Displacement: 71cc
-Weight: 21.5 lbs.
-Tank Size: .7L
-Dimensions: 26" x 11" x 18"
-Cutting Depth: 5"
This Kwikie hand held cut off saw is equiped with water feed.
(Diamond Saw Blade not included)
Buy 12 Diamond Blades (12" or 14") and this saw is FREE!!!
Buy 6 Diamond Blades (12" or 14") and get this saw for HALF PRICE!!!
| |
|
|
 | Core Drill Rig w/ pad, pump, fittings & Wheels | Description:
Our Core Drill Rigs are manufactured to exacting specification. All machine parts are made with the best raw materials available and can be odered anytime of the year.
Features:
* 15 & 20 AMP single & two speed motors
* Low noise motors
* Built in on/off switch
* Slip clutch
* Precisin gear rack
* Right or left hand arm feed
* Multi position water swivel
* Smooth roller carriage
* Convenient carrying handle
* Column height 32"
* Stroke 20"
* Can be blocked out for larger diameter core bits
* FULL line of accessories available | |
|
|
 | MK-CX-3 Series Walk-Behind Concrete And Asphalt Saw | Description:
| CX-3® Features: |
| • |
Compact, lightweight, engineered for maneuverability and reliability |
| • |
Can be used for wet or dry cutting |
| • |
Aluminum frame construction |
| • |
Cast-aluminum hinged blade guard |
| • |
Built-in water distribution system supplies water to both sides of blade. |
| • |
Saw designed for left or right mounting of blade and blade guard |
| • |
Cuts within 1" of wall or curb |
| • |
Sturdy single piece steel motor mount weldment to minimize vibration |
| • |
1" diameter blade shaft with self aligning bearings |
| • |
Folding handle bar for compact transport |
| • |
Polly V-belt |
| • |
Tachometer on Honda Engine |
| |
|
|
 | MK-1600 Series Walk-Behind Concrete And Asphalt Saws | Description:
| MK-1600 Series Features: |
| • |
One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation |
| • |
Powder-coated chassis resists peeling & corrosion |
| • |
Cast-aluminum hinged blade guard |
| • |
Stainless steel water distribution system supplies water to both sides of blade |
| • |
Blade guard mounts on both left- or right-hand side of saw and cuts within 1" of wall or curb |
| • |
1-1/4" blade shaft supported by two heavy-duty, self-aligning pillow block bearings |
| • |
Depth control assembly engineered for smooth, controlled blade insertion |
| • |
Durable 8" x 2-1/4" non-slip rubber wheels with maintenance-free hubs & roller bearings |
| • |
Positive-locking depth control mechanism |
| • |
Premium Series saws include built-in depth gauge, tach/hour meter, and lifting bale |
| • |
One-year limited warranty |
| |
|
|
 | MK-2000 Series Self-Propelled Concrete And Asphalt Saws | Description:
| MK-20 Series Features: |
| • |
One-piece box construction chassis made from 3/16\" hot-rolled steel will not flex during operation |
| • |
Powder-coated chassis resists peeling & corrosion |
| • |
Cast-aluminum hinged blade guard |
| • |
Stainless steel water distribution system supplies water to both sides of blade |
| • |
Blade guard mounts on both left- or right-hand side of saw and cuts within 1\" of wall or curb |
| • |
1-1/4\" blade shaft supported by two heavy-duty, self-aligning pillow block bearings |
| • |
Depth control assembly engineered for smooth, controlled blade insertion |
| • |
Built-in tach/hour meter |
| • |
Depth feed gauge indicator |
| • |
Heavy-duty hydro static transmission with variable speed drive |
| • |
Durable 8\"x 2 1/4\" non-slip rubber wheels with maintenance-free hubs & roller bearing |
| • |
Open loop propane system and 5 gallon (20 lb. tank) propane bottle on MK-2020KSP |
| • |
Forward travel speed: 0-80\'/min |
| |
|
|
 | MK-9000 Series Walk-Behind Concrete And Asphalt Saw | Description:
| MK-9000 Series Features: |
| • |
One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation |
| • |
Powder-coated chassis resists peeling & corrosion |
| • |
Cast-aluminum hinged blade guard |
| • |
Stainless steel water distribution system supplies water to both sides of blade |
| • |
Blade guard mounts on both left- or right-hand side of saw and cuts within 1" of wall or curb |
| • |
1-1/4" blade shaft supported by two heavy-duty, self-aligning pillow block bearings |
| • |
Power delivered to arbor via dual heavy duty notched v-belts |
| • |
Depth control assembly engineered for smooth, controlled blade insertion |
| • |
Positive-locking depth control mechanism |
| • |
Durable 8"x2 1/4" non-slip rubber wheels with maintenance-free hubs & roller bearings |
| • |
Rugged adjustable V-shaped pointer wheel assembly is durable and accurate. Adaptable for left- and right-handed cutting |
| • |
Engine mounts engineered to ensure minimal frame harmonics |
| |
|
|
| MK-CX-3 Series Walk-Behind Concrete And Asphalt Saw | Description:
| CX-3® Features: |
| • |
Compact, lightweight, engineered for maneuverability and reliability |
| • |
Can be used for wet or dry cutting |
| • |
Aluminum frame construction |
| • |
Cast-aluminum hinged blade guard |
| • |
Built-in water distribution system supplies water to both sides of blade. |
| • |
Saw designed for left or right mounting of blade and blade guard |
| • |
Cuts within 1" of wall or curb |
| • |
Sturdy single piece steel motor mount weldment to minimize vibration |
| • |
1" diameter blade shaft with self aligning bearings |
| • |
Folding handle bar for compact transport |
| • |
Polly V-belt |
| • |
Tachometer on Honda Engine |
| |
|
|
 | BIGFOOT hand held circular saw | Description:
The Bigfoot circular saw is a mandatory tool for the framer, carpenter, re modeler, and contractor. This circular saw is perfect for diamond blades cutting tile and cutting concrete.
Water feed system included.
The Diamond Blade Depot has package deals with this Bigfoot circular saw. Check out The CIRCULAR SAW DEAL for more details. | |
|
|
 | MK-DDG Double Disc Grinder | Description:
| MK-DDG Features: |
| • |
Uses two 10- or 20 segment 10"-diameter diamond grinding to level, smooth or clean the top surface of concrete slabs |
| • |
Provides a smoother finish compared to other methods such as scarifiers or scabblers |
| • |
Counter rotating discs provide balanced torque to prevent pulling left or right |
| • |
Can also be used to level small areas of uneven joints or high spots of 1/16 to 1/8 inch |
| • |
A 22-inch grinding width makes for quick removal |
| • |
Wide ergonomically designed T-grip handle for easy handling and maneuvering |
| • |
Dust shroud contains grinding debris |
| • |
2" vacuum port for dust-free operation |
| • |
Two-position wheel carriage for grinding and easy transport |
| • |
Works on concrete slabs, terrazzo, brick and stone and ceramic tile floors |
| |
|
|
 | MK-101 Pro Tile Saw | Description:
MK-101 Series Features:
• Fully enclosed high torque, fan-cooled motor
• Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
• Multi-position motor post and cutting head for convenient cutting of various tile sizes
• Built-in water distribution system supplies water to both sides of blade
• Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
• Accommodates 6" and 8" profile wheels
• Micro V-belt drive
• Blade shaft lock for easy blade removal
• Linear-bearing and chrome plated guide-bar assembly ensure precise cutting
• Cast aluminum blade guard and motor post
• One-piece reinforced zinc-plated steel frame
• One-year limited warranty from MK Diamond Products, Inc. | |
|
|
|
 | MK - Hand Drill 130/3 | Description:
MK130/3 Features:
• Three-speed gearbox
• Slip clutch
• Built-in water swivel
• Thermal overload switch
• Overload indicator light
• Ground Fault Interrupter
• Metal carrying case | |
|
|
| MK-DDG Double Disc Grinder | Description:
| MK-DDG Features: |
| • |
Uses two 10- or 20 segment 10"-diameter diamond grinding to level, smooth or clean the top surface of concrete slabs |
| • |
Provides a smoother finish compared to other methods such as scarifiers or scabblers |
| • |
Counter rotating discs provide balanced torque to prevent pulling left or right |
| • |
Can also be used to level small areas of uneven joints or high spots of 1/16 to 1/8 inch |
| • |
A 22-inch grinding width makes for quick removal |
| • |
Wide ergonomically designed T-grip handle for easy handling and maneuvering |
| • |
Dust shroud contains grinding debris |
| • |
2" vacuum port for dust-free operation |
| • |
Two-position wheel carriage for grinding and easy transport |
| • |
Works on concrete slabs, terrazzo, brick and stone and ceramic tile floors |
| |
|
|
 | MK - 1506 VR Profile / Edge Miller | Description:
| The MK-1506 VR is a precision machine designed to produce clean profiles
and contours along the edges of natural stone slabs. When fitted with a MK
Diamond profile miller, this tool creates professional contour and profile
borders. |
| • |
Powerful universal variable speed motor
|
| • |
Quick release brass water-feed coupling
|
| • |
Die-cast aluminum guide carriage with composite roller assembly
|
| • |
Ground Fault Circuit Interrupter included
|
| • |
Ergonomically designed for user comfort
|
| |
|
|
 | AIR POWERED WET POLISHER/GRINDER Power Tools | Description:
This extremely well engineered pneumatic polishing tool is made of aircraft aluminum and designed for continuous operating day in and day out. This light weight tool utilizes water-tight sealed bearings. Sturdy alloy gears and noise reduction housing. Variable operating speeds from 240 to 4500 RPM. This unit comes complete with water hoses, brass fittings and wrench. Use with our Velcro backed pads from 3 inch to 5 inch.
| |
|
|
 | MK - 1503-S Wet Polisher | Description:
Description:
The MK-1503-S wet polisher is ideal for handheld grinding and polishing
of gemstones, rock materials, marble and granite . The handheld grinder
easily attaches to a standard hose to enable the unit to dispense a steady
flow of water through a control valve to the work piece. The MK-1503-S
comes with a water hose, GFCI , and spanner wrenches. The MK-1503-S Kit
also includes 4" resin polishing disc set and a 4" rubber backer
pad. |
MK-1503-S Features:
| • |
Durable universal motor operates on standard house
current |
| • |
Compact tool with ergonomically designed sure-grip
handle |
| • |
Lightweight water attachment with adjustable valve |
| • |
Includes Ground Fault Circuit Interrupter |
|
| |
|
|
 | MK - 212 Rail Saw | Description:
MK-212 Features:
• 2 HP direct drive motor
• Plunge cut capability for scoring or cutting large tile
• Tilting head allows easy and precise 45º miter cuts up to 1-1/2" deep
• diiamond blade guard accommodates 10" profile wheels
• Pivoting diiamond blade guard for easy diiamond blade changes
• Cutting head mounted on a roller-bearing carriage running on a stainless steel rail
• 90º cutting guide for accurate material placement
• Friction locks on both head height adjustment and carriage travel
• Constructed with powder coated heavy-gauge sheet metal and cast aluminum components
• 1/4" thick replaceable rubber cutting surface
• Built-in lifting handles for easy transport
• Built-in stand with removable legs | |
|
|
